Installing the 64 Bit Version

Category: Setup

You can try to solve your very large files in 64-bit version without memory problems. Install StatiCAD Professional V.6.X.X.X Installation (64 Bit) and StatiCAD-Lock V6 programs in your customer pane...

Comparison of Frame Finite Element Results with StatiCAD V6.0.9.5 Program and SAP2000 Program

Category: Verfication

Comparison of Frame Finite Element Results in StatiCAD V6.0.9.5 Program and SAP2000 Program In order to be solved in the demo version and kept simple, a system consisting of 4 columns and 2 floors wa...

Considerations in New Masonry Building Design

Category: New Masonry Building

Within the scope of TBDY 2018, the main points to be considered in the new masonry building design are briefly listed.   1- TBDY2018 regulation is selected in the Project General Settings Regulation...

Comparison of Frame and Shell Finite Element Results in StatiCAD and SAP2000 Program

Category: Verfication

Comparison of Frame Finite Element Results and Shell Load Transfers in StatiCAD V6.0.9.0 Program and SAP2000 Program In order to be solved in the demo version and kept simple, a system consisting of ...

Percentage of Error in Finite Element Analysis and Solutions

Category: Modelling

As it is known, within the scope of RYTEIE-2019, the analysis of masonry structures with finite elements is stipulated. Since the system model in masonry structures can be complex, it is necessary to ...

Masonry Building Strengthening in StatiCAD Program

Category: Strengthening

Types of Empowerment that can be made 1-Reinforcement with shotcrete 2-Reinforcement by adding vertical beam to the system 3-Reinforcement with fibrous polymer wrap 4-Strengthening by adding new w...